Bronze Filamet 0.5kg


Price:
Sale price$183.75

Description

Bronze Filamet contains 88%-90% metal and enables any FFM Printer to produce metal objects.   Printed products require debinding and  sintering in a furnace.  Once fired in a sintering furnace, the result is 100% metal.

1.75mm

What you'll need to print;

  • FDM/FFF Printer
  • Hardened Steel Nozzle 0.6mm
  • Filawarmer
  • Blue Painters tape for your print bed.

What you'll need to debind and sinter; 

  • Kiln or Furnace that can hold the sintering temperature (Sinter temps listed here.)
  • Crucible
  • Sintering Refractory Balast Al2O3
  • Sintering Carbon

Slicer Setup: Start with a basic PLA profile for your printer. Change the nozzle temperature to 210°C (410°F) and tune in the range of 190-230°C (374/446°F). Optionally, set the print bed to 40-50°C (104-122°F). Set the flow rate to 135%. Adjust settings from there as needed.

Tip: Put a layer of blue painters tape on the print bed. Filamet™ has great adhesion to the bed.

Nozzle: 0.6mm or larger, stainless steel.

Spool Placement: Reducing friction and pull on Bronze Filamet™ during printing is important. Try hanging the filament spool 12 inches above the printer.

Polishing: Visit our Use Instructions page for polishing guidelines. 


Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.

Note: All sales final except in cases of defective product.

Made In America

You may also like

Recently viewed